-
The JBL CSA280Z supports both 70 and 100V installations out of the box. It includes 2 x RJ45 connectors for use with the company's CSR-V in-wall volume controls. Inputs are provided by mono sum RCA connectors and Euroblock. Outputs are provided by Euroblock connectors. Illuminated knobs provide visual feedback, and the universal power supply allows the amplifier to accept AC voltages from 100 to 240 VAC, 50/60 Hz. The amp also fulfills HARMAN's GreenEdge environmental initiative.
-
QSC CMX 300Va is a Commercial Power Amplifier. It is an economical and rug power amplifier design to meet the needs of system integrators. QSC CMX 300Va is based upon the proven, rock-solid, reliable performance found in the award winning RMX Series. Frequency Response: 20 Hz – 20 kHz: ±1 dB -3 dB points: 5 Hz – 50 kHz Stereo Mode: 200 W for 8Ω , 300 W for 4Ω, 430 W for 2Ω Bridge Mono Mode: 600 W for 8Ω, 830 W for 4Ω, 600 W maximum in 70V Direct Drive Dimension(H x W x D): 3.5" (8.9 cm) 2 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep to rear support ears
-
Out of stockYamaha R-N602 Network Hi-Fi Receiver offers a High sound quality network Hi-Fi receiver with support for DSD 5.6 MHz reproduction. Compatible with MusicCast and packed with network functions.
-
RCF AM 2160 is a mixer-amplifiers with 4 mic-line audio inputs on removable connectors and 2 aux inputs for music sources. 160 W nominal output power available either for low impedance loudspeakers or 100 – 70 V constant voltage line. POWER OUTPUT (HI-Z): 160 W RMS FREQUENCY RESPONSE (-3DB): 50 Hz ÷ 14 kHz SIGNAL OUTPUT: 2 x RCA PRODUCT DIMENSION(W x D x H): 442 mm/17.4 in x 230 mm/9.06 in x 88 mm/3.46 in
-
QSC SPA2-60 Series amplifiers from QSC are four, half-rack RU, convection cooled power amplifiers. These amps can also be bridge to supply up to 200 watts into 4 Ω and 8 Ω, and up to 250 watts into 70 V or 100 V loads. Channels: 2 Stereo Mode: 60 W per channel 8 Ω and 4 Ω Frequency response (4 Ω and 8 Ω): 20 Hz - 20 KHz +/- 0.1 dB Dimensions: 1.7” x 8.7” x 9.5” (43 mm x 220 mm x 241 mm)
-
RCF ZE 2200 is the 6 zones expander unit, allowing to increase the number of a ZM 2000 system's zones. Up to 8 units can be connected in order to reach a maximum of 54 manageable zones. RCF ZE 2200 offers the possibility to either share the main unit music program or insert a local source.POWER OUTPUT (@ 100 V): 240 W RMSFREQUENCY RESPONSE (-3DB): 50 Hz ÷ 20 kHzNUMBER OF CHANNELS: 6CONNECTION CABLES: FTP CAT 5PRODUCT DIMENSION(W x D x H): 430 mm/16.93 in x 365 mm/14.37 in x 44 mm/1.73 in
-
The JBL NCSA2120Z-U-EU Audio Amplifier (2x 120W) provides a compact and powerful amplification solution for installed applications. The unit utilizes a universal switch-mode power supply and Crown's Drive Core technology to deliver reliable and efficient sound amplification. this amplifier offers 2 x 120W at 4/8Ohms, Plenum Rated (UL2043), Compact size and lightweight, Convection Cooled, Auto-standby mode for energy savings, Summing RCA inputs for each channel.
-
The JBL NCSA2120Z-U-UK Audio Amplifier (2x 120W) provides a compact and powerful amplification solution for installed applications. The unit utilizes a universal switch-mode power supply and Crown's Drive Core technology to deliver reliable and efficient sound amplification. this amplifier offers 2 x 120W at 4/8Ohms, Plenum Rated (UL2043), Compact size and lightweight, Convection Cooled, Auto-standby mode for energy savings, Summing RCA inputs for each channel.
-
QSC ISA280 is a ISA Install Professional Power Amplifiers System. The design to meet the needs of sound system designers and contractors worldwide. The ISA Series a rugged, cost-effective power solution for any permanently installed sound system. Frequency Response : 20 Hz-20 kHz, +0/-1 dB Stereo Mode: 185 W for 8Ω, 280 W for 4Ω, 430 W for 2Ω Bridge Mono Mode: 600 W for 8Ω, 830 W for 4Ω Dimensions (HWD) 5.25" (13.3 cm) 3 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep from front mounting rails
-
QSC SPA2-200 Series amplifiers from QSC are four, half-rack RU, convection cooled power amplifiers. These amps can also be bridge to supply up to 400 watts into 4 Ω and 8 Ω, and up to 350 watts into 70 V or 100 V loads. 2 Channels and ENERGY STAR qualified amplifier Stereo Mode: 200 W per channel 8 Ω and 4 Ω Frequency response (4 Ω and 8 Ω): 20 Hz - 20 KHz +/- 0.1 dB Dimensions: 1.7” x 8.7” x 9.5” (43 mm x 220 mm x 241 mm)
-
The JBL NCSA2300Z-34-EU Dual-Channel 300W Amplifier from JBL delivers powerful sound and efficient performance. this amplifier provides a DriveCore-based sound solution, which utilizes one small chip that significantly reduces the part count and increases reliability while still maintaining high performance. It provides amplification with a choice of the low impedance, 70V or 100V outputs. The amp includes a rack mounting kit for installations to a cabinet and an RJ45 connector for an optional remote volume control using JBL's CSR-V control module.