-
QSC CX168 is a 8 Channel Professional Power Amplifier. And the Power Light technology takes your audio to an entirely new level. Delivered tighter bass and clean, transparent highs. Power Light also cuts waste heat, boosts reliability, and eliminate unwanted noise and hum. Frequency Response 20 Hz – 20 kHz, + 0.2 dB | 8 Hz – 50 kHz, +0/-3 dB Stereo Mode: 90 W for 8Ω, 130 W for 4Ω Bridge-Mono Mode: 180 W for 16Ω, 260 W for 8Ω Dimensions (HWD) 3.5" (8.9 cm) 2 RU x 19" (48.3 cm) rack mounting x 14" (35.6 cm) from front mounting rails -
QSC CX204V is a 2 Channel Professional Power Amplifier. And the four channels in only two rack spaces, without compromise on power. Each model is equip with exclusive QSC Power Light switching power supply technology to virtually eliminate noise and hum. Frequency Response 20 Hz - 20 kHz, ± 0.2 dB | 8 Hz - 50 kHz, + 0/-3 dB Stereo Mode: 300 W maximum in 70V Bridge-Mono Mode: 600 W maximum in 140V Dimensions (HWD): 3.5" (8.9 cm) 2 RU x 19" (48.3 cm) rack mounting x 14" (35.6 cm) from front mounting rails -
QSC CX204V 4-channel 70V professional power amplifiers give you four channels in only two rack spaces, without compromising on power. And equipped with exclusive QSC Power Light switching power supply technology to virtually eliminate noise and hum. Frequency Response 20 Hz - 20 kHz, ± 0.2 dB | 8 Hz - 50 kHz, + 0/-3 dB HD15 DataPort connector for QSControl computer control 1-dB detented gain controls for fast and accurate gain settings Dimensions (HWD) 3.5" (8.9 cm) 2 RU x 19" (48.3 cm) rack mounting x 14" (35.6 cm) from front mounting rails -
QSC CX254 is a 4 channel Professional Power Amplifier. It gives you four channels in only two rack spaces, without compromising on power. QSC CX254 equipped with exclusive QSC Power Light switching power supply technology to virtually eliminate noise and hum. Frequency Response: 20 Hz - 20 kHz, ± 0.2 dB Stereo Mode: 170 W for 8Ω, 250 W for 4Ω, 450 W for 2Ω Bridge-Mono Mode: 340 W for 16Ω, 500 W for 8Ω, 900 W for 4Ω Dimensions (H x W x D): 3.5" (8.9 cm) 2 RU x 19" (48.3 cm) rack mounting x 14" (35.6 cm) from front mounting rails -
QSC CX302 is a 2 channel Low-Z Power Amplifier. Exclusive Power Light switch-mode power supply technology for high performance and compact size. The Active inrush limiting eliminates AC inrush current, removing the need for expensive power sequencers. XLR and detachable Euro style input connectors. Frequency Response: 20 Hz–20 kHz, ±0.2 dB Stereo Mode: 200 W for 8 Ω, 325 W for 4 Ω and 600 W for 2Ω Bridged Mono Mode: 400 W for 16Ω, 700 W for 8Ω and 1200 W for 4Ω Dimensions (H x W x D): 3.5" x 19" x 14"(89 mm x 483 mm x 356 mm) -
QSC CX302V is a 2 channel 70V Power Amplifier. Exclusive Power Light switch-mode power supply technology for high performance and compact size. QSC CX302V in the Active inrush limiting eliminates AC inrush current, removing the need for expensive power sequencers. XLR and detachable Euro style input connectors. Frequency Response: 20 Hz–20 kHz, ±0.2 dB Stereo Mode: 200 W for 70V / 20 Hz – 20 kHz / 0.05% THD, 250 W for 70V / 1 kHz / 0.05% THD and 300 W for 70V / 1 kHz / 1% THD Bridged Mono Mode: 400 W for 140V / 20 Hz – 20 kHz / 0.1% THD, 500 W for 140V / 1 kHz / 0.05% THD and 600 W for 140V / 1 kHz / 1% THD Dimensions (H x W x D): 3.5" x 19" x 14"(89 mm x 483 mm x 356 mm) -
QSC CX404 is a 4 Channel Professional Power Amplifier. It gives four channels in only two rack spaces, without compromising on power. CX404 is equip with exclusive QSC Power Light switching power supply technology to virtually eliminate noise and hum. Frequency Response 20 Hz - 20 kHz, ± 0.2 dB | 8 Hz - 50 kHz, + 0/-3 dB Stereo Mode: 250 W for 8Ω, 400 W for 4Ω (0.1% THD, 1 kHz) Bridge-Mono Mode: 500 W for 16Ω, 800 W for 8Ω (0.1% THD, 1 kHz) Dimensions (H x W x D): 3.5" (8.9 cm) 2 RU x 19" (48.3 cm) rack mounting x 14" (35.6 cm) from front mounting rails -
QSC CX502 is a 2 channel Low-Z Power Amplifier. Exclusive Power Light switch-mode power supply technology for high performance and compact size. QSC CX502 in the Active inrush limiting eliminates AC inrush current, removing the need for expensive power sequencers. XLR and detachable Euro style input connectors. Frequency Response: 20 Hz–20 kHz, ±0.2 dB Stereo Mode: 300 W for 8 Ω, 500 W for 4 Ω and 800 W for 2Ω Bridged Mono Mode: 600 W for 16Ω, 1100 W for 8Ω and 1600 W for 4Ω Dimensions (H x W x D): 3.5" x 19" x 14"(89 mm x 483 mm x 356 mm) -
QSC CX602V is a 2 Channel Professional Power Amplifier and it is design to meet the specialize need of sound contractors. The QSC Power Light technology with high-output power, versatile loading options, high thermal capacity and unmatched reliability, the CX Series is the perfect solution to any permanently install sound system. Frequency Response: 20 Hz - 20 kHz, ± 0.2 dB Stereo Mode: 550 W for 8Ω, 600 W maximum for 70V Bridge-Mono Mode: 1100 W for 16Ω, 1200 W maximum for 140V Dimensions (H x W x D): 3.5" (8.9 cm) 2 RU x 19" (48.3 cm) rack mounting x 14" (35.6 cm) from front mounting rails -
QSC CX702 is a 2 channel Low-Z Power Amplifier. Exclusive Power Light switch-mode power supply technology for high performance and compact size. QSC CX702 in the Active inrush limiting eliminates AC inrush current, removing the need for expensive power sequencers. XLR and detachable Euro style input connectors. Frequency Response: 20 Hz–20 kHz, ±0.2 dB Stereo Mode: 425 W for 8 Ω, 700 W for 4 Ω and 1200 W for 2Ω Bridged Mono Mode: 850 W for 16Ω, 1500 W for 8Ω and 2400 W for 4Ω Dimensions (H x W x D): 3.5" x 19" x 14"(89 mm x 483 mm x 356 mm) -
QSC CX902 is a 2 channel Low-Z Power Amplifier. Exclusive Power Light switch-mode power supply technology for high performance and compact size. QSC CX902 in the Active inrush limiting eliminates AC inrush current, removing the need for expensive power sequencers. XLR and detachable Euro style input connectors. Frequency Response: 20 Hz–20 kHz, ±0.2 dB Stereo Mode: 550 W for 8 Ω, 900 W for 4 Ω, 1500 W for 2Ω, 400 W for 70V / 20 Hz – 20 kHz, 440 W for 70V / 1 kHz, 600 W for 70V / 1 kHz Bridged Mono Mode: 1100 W for 16Ω, 2000 W for 8Ω, 3000 W for 4Ω, 800 W for 140V / 20 Hz – 20 kHz, 880 W for 140V / 1 kHz / 0.05% THD,1200 W for 140V / 1 kHz / 1% THD Dimensions (H x W x D): 3.5" x 19" x 14"(89 mm x 483 mm x 356 mm) -
QSC ISA1350 is a ISA Install System Amplifier. And the design to meet the need of sound system and contractors worldwide. Versatile loading options and a comprehensive set of features make the ISA Series a rugged. And cost-effective power solution for any permanently installed sound system. Frequency Response : 20 Hz-20 kHz, +0/-1 dB Stereo Mode: 800 W for 8Ω, 1300 W for 4Ω, 2000W for 2Ω Bridge Mono Mode: 2800 W for 8Ω, 4000 W for 4Ω Dimensions (HWD) 5.25" (13.3 cm) 3 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep from front mounting rails -
QSC ISA280 is a ISA Install Professional Power Amplifiers System. The design to meet the needs of sound system designers and contractors worldwide. The ISA Series a rugged, cost-effective power solution for any permanently installed sound system. Frequency Response : 20 Hz-20 kHz, +0/-1 dB Stereo Mode: 185 W for 8Ω, 280 W for 4Ω, 430 W for 2Ω Bridge Mono Mode: 600 W for 8Ω, 830 W for 4Ω Dimensions (HWD) 5.25" (13.3 cm) 3 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep from front mounting rails -
QSC ISA300Ti is a ISA Install 2 Channel Professional Power Amplifier System. And it designed to meet the needs of sound system designers. Versatile loading options and a comprehensive set of features make the ISA Series a rugged. And cost-effective power solution for any permanently installed sound system. Frequency Response(-3 dB): 50 Hz, -0.5 dB at 20 kHz Stereo Mode: 185 W for 8Ω, 280 W for 4Ω, 430 W 2Ω Bridge Mono Mode: 600 W for 8Ω, 830 W for 4Ω Dimensions (HWD) 5.25" (13.3 cm) 3 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep from front mounting rails -
QSC ISA450 is a ISA Install Professional Power Amplifier System. And it designed to meet the needs of sound system designers and contractors worldwide. The ISA Series a rugged, cost-effective power solution for any permanently installed sound system. Frequency Response: 20 Hz-20 kHz, +0/-1 dB Stereo Mode: 260 W for 8Ω, 425 W for 4Ω, 700 W for 2Ω Bridge Mono Mode: 900 W for 8Ω, 1400 W for 4Ω Dimensions (H x W x D): 5.25" (13.3 cm) 3 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep from front mounting rails -
QSC ISA500Ti is a ISA Install 2 Channel Professional Power Amplifier. It designed to meet the needs of sound system designers and contractors worldwide. Versatile loading options and a comprehensive set of features make the ISA Series a rugged. And cost-effective power solution for any permanently installed sound system. Frequency Response(-3 dB): 50 Hz, -0.5 dB at 20 kHz Stereo Mode: 260 W for 8Ω, 425 W for 4Ω, 700 W for 2Ω Bridge Mono Mode: 900 W for 8Ω, 1400 W for 4Ω Dimensions (HWD) 5.25" (13.3 cm) 3 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep from front mounting rails -
QSC ISA750 is a ISA Install 2 Channel Professional Power Amplifier System. It design to meet the needs of sound system designers and contractors worldwide. Versatile loading options and a comprehensive set of features make the ISA Series a rugged. And cost-effective power solution for any permanently installed sound system. Frequency Response: 20 Hz-20 kHz, +0/-1 dB Stereo Mode: 450 W for 8Ω, 650 W for 4Ω, 1200 W for 2Ω Bridge Mono Mode: 1500 W for 8Ω, 2400 W for 4Ω Dimensions (HWD) 5.25" (13.3 cm) 3 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep from front mounting rails -
QSC ISA800Ti is a ISA Install 2 Channel Professional Power Amplifier. QSC ISA800Ti designed to meet the needs of sound system designers and contractors worldwide. Versatile loading options and a comprehensive set of features make the ISA Series a rugged. And cost-effective power solution for any permanently installed sound system. Frequency Response(-3 dB): 50 Hz, -0.5 dB at 20 kHz Stereo Mode: 450 W for 8Ω, 650 W for 4Ω, 1200 W for 2Ω Bridge Mono Mode: 1500 W for 8Ω, 2400 W for 4Ω Dimensions (HWD) 5.25" (13.3 cm) 3 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep from front mounting rails -
Frequency Response (±3 dB) : 80 Hz - 20 kHz Frequency Range (-10 dB) : 68 Hz - 22 kHz Nominal Impedance : HF: 16Ω, LF bi amp mode: 8Ω and LF tri amp mode: 16Ω (×2) Maximum Output (dB SPL at 1 m) Continuous / Peak : HF : 126 dB / 132 dB and LF : 122 dB / 128 dB Nominal Coverage : Horizontal 140 degrees and Vertical: dependent on number of elements used Dimensions (HWD) inches : 11.8 x 27 x 13.4 -
QSC MP-A20V Series music and paging amplifier family builds on a 50 year legacy of QSC amplifier dependability and quality while offering an incredible amount of flexibility for business music and paging applications. Power (all channels driven)4 Ω, 8 Ω, 70 V, 100 V: 200 W FlexAmp Technology Allows each pair of amplifier channels to deliver up to 400 W total power, in any ratio Channels: 2 Dimensions (H x W x D): 1.75 " x 19 " x 14.8 "(44 mm x 483 mm x 377 mm) -
QSC MP-A40V Series music and paging amplifier family builds on a 50 year legacy of QSC amplifier dependability and quality while offering an incredible amount of flexibility for business music and paging applications. Power (all channels driven) 4 Ω, 8 Ω, 70 V, 100 V: 200 W FlexAmp Technology Allows each pair of amplifier channels to deliver up to 400 W total power, in any ratio Channels: 4 Dimensions (H x W x D): 1.75 " x 19 " x 14.8 "(44 mm x 483 mm x 377 mm) -
QSC MP-A80V Series music and paging amplifier family builds on a 50 year legacy of QSC amplifier dependability and quality while offering an incredible amount of flexibility for business music and paging applications. Power (all channels driven)4 Ω, 8 Ω, 70, V100 V: 200 W FlexAmp Technology Allows each pair of amplifier channels to deliver up to 400 W total power, in any ratio Channels: 8 Dimensions (H x W x D): 1.75 " x 19 " x 14.8 "(44 mm x 483 mm x 377 mm) -
QSC SPA2-200 Series amplifiers from QSC are four, half-rack RU, convection cooled power amplifiers. These amps can also be bridge to supply up to 400 watts into 4 Ω and 8 Ω, and up to 350 watts into 70 V or 100 V loads. 2 Channels and ENERGY STAR qualified amplifier Stereo Mode: 200 W per channel 8 Ω and 4 Ω Frequency response (4 Ω and 8 Ω): 20 Hz - 20 KHz +/- 0.1 dB Dimensions: 1.7” x 8.7” x 9.5” (43 mm x 220 mm x 241 mm) -
QSC SPA2-60 Series amplifiers from QSC are four, half-rack RU, convection cooled power amplifiers. These amps can also be bridge to supply up to 200 watts into 4 Ω and 8 Ω, and up to 250 watts into 70 V or 100 V loads. Channels: 2 Stereo Mode: 60 W per channel 8 Ω and 4 Ω Frequency response (4 Ω and 8 Ω): 20 Hz - 20 KHz +/- 0.1 dB Dimensions: 1.7” x 8.7” x 9.5” (43 mm x 220 mm x 241 mm) -
QSC SPA4-100 Series amplifiers from QSC are four, half-rack RU, convection cooled power amplifiers. These amps can also be bridge to supply up to 200 watts into 4 Ω and 8 Ω, and up to 175 watts into 70 V or 100 V loads. 2 Channels and ENERGY STAR qualified amplifier Stereo Mode: 100 W per channel 8 Ω and 4 Ω Frequency response (4 Ω and 8 Ω): 20 Hz - 20 KHz +/- 0.1 dB Dimensions: 1.7” x 8.7” x 9.5” (43 mm x 220 mm x 241 mm) -
QSC SPA4-60 Series amplifiers from QSC are four, half-rack RU, convection cooled power amplifiers. These amps can also be bridge to supply up to 100 watts into 4 Ω and 8 Ω, and up to 125 watts into 70 V or 100 V loads. 2 Channels and ENERGY STAR qualified amplifier Stereo Mode: 60 W per channel 8 Ω and 4 Ω Frequency response (4 Ω and 8 Ω): 20 Hz - 20 KHz +/- 0.1 dB Dimensions: 1.7” x 8.7” x 9.5” (43 mm x 220 mm x 241 mm) -
QSC AD-S282H T-BK is a Contemporary style, weather-resistant enclosure and components - ideal for a wide range of applications. Dual 8-inch, 2-way system - in a lightweight, multipurpose enclosure featuring a heavy duty, powder coated aluminum grill. Frequency Response (-6 dB) : 80 Hz - 27.7 kHz Nominal Impedance : 8 ohms Power Rating Passive : 450 W (IEC 8 hours) Nominal Coverage: 90° H x 60° V (-6 dB) (rotatable to 60° H x 90° V) -
QSC AD-S282H T-WH is a Contemporary style, weather-resistant enclosure and components - ideal for a wide range of applications. Dual 8-inch, 2-way system - in a lightweight, multipurpose enclosure featuring a heavy duty, powder coated aluminum grill. Frequency Response (-6 dB) : 80 Hz - 27.7 kHz Nominal Impedance : 8 ohms Power Rating Passive : 450 W (IEC 8 hours) Nominal Coverage: 90° H x 60° V (-6 dB) (rotatable to 60° H x 90° V) -
QSC Surface Mound Speaker AP-5102-BK Black is Directivity Matched Transition (DMT) ensures smooth, coherent power response across the listening plane Frequency response (-10 dB) : 60 Hz - 18 kHz Coverage angle : 105˚ conical DMT Nominal impedance: 8Ω Maximum SPL at 1 m (passive): 121 dB continuous3 HF transducer: 76 mm (3-inch) voice coil, compression driver LF transducer: 254 mm (10-inch) driver with 76 mm (3-inch) voice coil Dimensions (HWD): 22 × 12 × 10.5 in. -
QSC Surface Mound Speaker AP-5102-WH White is Directivity Matched Transition (DMT) ensures smooth, coherent power response across the listening plane Frequency response (-10 dB) : 60 Hz - 18 kHz Coverage angle : 105˚ conical DMT Nominal impedance: 8Ω Maximum SPL at 1 m (passive): 121 dB continuous3 HF transducer: 76 mm (3-inch) voice coil, compression driver LF transducer: 254 mm (10-inch) driver with 76 mm (3-inch) voice coil Dimensions (HWD): 22 × 12 × 10.5 in. -
QSC AP-5122-BK is a Surface Speaker, Using Directivity Matched Transition (DMT) Method ensures smooth, coherent power response across the listening plane. Frequency response (-10 dB): 48 Hz - 18 kHz Coverage angle: 90˚ conical DMT Nominal impedance: 8Ω Maximum SPL at 1 m (passive): 122 dB continuous and 128 dB peak HF transducer: 76 mm (3-inch) voice coil, compression driver LF transducer: 305 mm (12-inch) driver with 102 mm (4-inch) voice coil Dimensions (HWD): 26 × 15 × 13 in. -
QSC AP-5122-WH is a Surface Speaker, Using Directivity Matched Transition (DMT) Method ensures smooth, coherent power response across the listening plane. Frequency response (-10 dB): 48 Hz - 18 kHz Coverage angle: 90˚ conical DMT Nominal impedance: 8Ω Maximum SPL at 1 m (passive): 122 dB continuous and 128 dB peak HF transducer: 76 mm (3-inch) voice coil, compression driver LF transducer: 305 mm (12-inch) driver with 102 mm (4-inch) voice coil Dimensions (HWD): 26 × 15 × 13 in. -
QSC AP-5152-BK is a Surface Speaker using Directivity Matched Transition (DMT) Technology, It ensures smooth, coherent power response across the listening plane. Frequency response (-10 dB): 44 Hz - 18 kHz Coverage angle: 75˚ conical DMT Nominal impedance: 8Ω Maximum SPL at 1 m (passive): 123 dB continuous and 129 dB peak HF transducer: 76 mm (3-inch) voice coil, compression driver; LF transducer: 381 mm (15-inch) driver with 102 mm (4-inch) voice coil Dimensions (H x W x D): 32 × 17.5 × 15.2 in. -
QSC AP-5152-WH is a Surface Speaker using Directivity Matched Transition (DMT) Technology, It ensures smooth, coherent power response across the listening plane. Frequency response (-10 dB): 44 Hz - 18 kHz Coverage angle: 75˚ conical DMT Nominal impedance: 8Ω Maximum SPL at 1 m (passive): 123 dB continuous and 129 dB peak HF transducer: 76 mm (3-inch) voice coil, compression driver; LF transducer: 381 mm (15-inch) driver with 102 mm (4-inch) voice coil Dimensions (H x W x D): 32 × 17.5 × 15.2 in. -
QSC WL118-sw-BK is a Subwoofer Transducers Low Frequency : 850 W, 8Ω 18-inch woofer with a 4-inch voice coil, ceramic magnet assembly Frequency Response (±3 dB) : 32 Hz - 200 Hz Frequency Range (-10 dB) : 29 Hz - 800 Hz Nominal Impedance : 8Ω Continuous Power Capacity : LF: 850 W Dimensions (HWD) inches : 22.1 x 27.6 x 30.3 in
شركة أي تراست للأنظمة
شركة أي تراست للأنظمة
دبي – الخليج التجاري – باي سكوير – قسم المشاريع الرجاء التواصل للمواعيد 0556693323
عجمان – الحميدية – اللوجيستيك والعمليات – للدعم الفني الواتس اس على الرقم 0566990926
الايميل info@itrustsystems.com
اشترك في النشرة الإخبارية المجانية
© 2024 | I-Trust Systems | كل الحقوق محفوظة | شروط الخدمة | سياسة الاسترجاع